Please Contact Us if Necessary , Email :
[Technology Classroom] UniMAT Internet of Things Application Course (6) - Internet of Things Projection Application

[Technology Classroom] UniMAT Internet of Things Application Course (6) - Internet of Things Projection Application

In order to help UniMAT customers use IoT products more conveniently, a series of articles on Internet of Things application courses are launched. The articles will comprehensively introduce the software and hardware, operation methods, related configurations, typical applications, common problems and other knowledge of UniMAT IoT. After reading the full text, you can have a comprehensive understanding of the Internet of Things, and achieve more with less for the application of the Internet of Things.

This issue brings you the UniMAT Internet of Things screen projection application .

There are three ways of screencasting: LAN screencasting, remote screencasting, and mobile screencasting


1. LAN screen projection



Uniface software has a built-in small VNC software, which can realize screen projection in the local area network.

A. Software location: Right-click the software icon, open the location of the file, and find tvnviewer. Suggest to send to desktop

B. Fill in the IP address of the touch screen in the local area network, and click connect to project the touch screen to the computer.

Computer operation, touch screen synchronous operation. Remote desktop similar to QQ.


C. Scenario:

a, debugging, do not have to operate in front of the touch screen

b. After entering the configuration, long press the upper left corner to enter the system setting, and you can view the setting system.

The IP can be modified in the system settings.

, c, Ubox products are also applicable


2. Remote projection


Open Anyaccess, select the device that needs to be mirrored remotely, go to Communication Configuration > Remote Download > Enable Transparent Transmission > Projection

3. Mobile phone screen projection


Open the Industrial Device Cloud APP, select the device that needs to be screened, and click VNC Monitoring > Enable Transparent Transmission.

If there is no VNC monitoring in the APP, please open the second-level domain name and scan the code to download the latest APP software.

Before screencasting on your phone, you need to add a virtual device to the second-level domain name.

Leave a comment

Please note: comments must be approved before they are published.

If You Would Like to Contact Support or Make a Purchase Please Fill out the Form

If you have urgent needs, please call our customer service number

Please fill in your information in detail so that our support staff can clearly understand your needs.

Value is required
Value is required
Please input the correct email address
Value is required
Thank you!